100872 Isolator Ex9I125 2P 100A

EAN: 8592765008732

Isolators Ex9I125 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I125 are produced in modular design with one module unit width per pole. Can be connected via standard busbars of both fork as well as pin type of connection.

Characteristics

Paremeter Value
Number of normally closed contacts 0
Short-circuit breaking capacity (Icw) 1.20
Degree of protection (IP) IP20
Nominal rated current 100
Forced segregation (according to DIN VDE 0113) YES
Width in number of modular spacings 2
Built-in depth 80
Switching function Off switch
Number of change-over contacts 0
Nominal rated voltage 400
Rated switching capacity 2.5
With signal lamp NO
Colour calotte Grey
Number of normally open contacts 2
Number of poles 2
Voltage type AC

Documents

Document Type Document Name Size Format
Manual Mounting instruction Ex9I125 1.3mb PDF
Declaration of Conformity Declarations of Conformity Ex9I125 0.5mb PDF
Datasheet Datasheet Ex9I125 0.8mb PDF
Catalogue Catalogue Installation Devices 0.0gb PDF WEB