100878 Isolator Ex9I125 3P 100A

EAN: 8592765008794

Isolators Ex9I125 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I125 are produced in modular design with one module unit width per pole. Can be connected via standard busbars of both fork as well as pin type of connection.


Paremeter Value
Nominal rated current 100
Rated switching capacity 2.5
Number of normally open contacts 3
Number of change-over contacts 0
Short-circuit breaking capacity (Icw) 1.20
Voltage type AC
Width in number of modular spacings 3
Degree of protection (IP) IP20
Number of normally closed contacts 0
With signal lamp NO
Number of poles 3
Nominal rated voltage 400
Colour calotte Grey
Built-in depth 80
Switching function Off switch
Forced segregation (according to DIN VDE 0113) YES


Document Type Document Name Size Format
Manual Mounting instruction Ex9I125 1.3mb PDF
Declaration of Conformity Declarations of Conformity Ex9I125 0.5mb PDF
Datasheet Datasheet Ex9I125 0.8mb PDF
Catalogue Catalogue Installation Devices 0.0gb PDF WEB