EAN: 8592765008862
Isolators Ex9I125 can be used as a main switch in wide variety of applications. These switches are tested according to IEC / EN 60947-3 standards and also fulfill the requirements for the isolation functionality. Utilization category AC-22A ensures possibility of switching mixed resistive and inductive loads with low overloads with cos ϕ = 0.65. Subcategory A allows frequent operation. Isolators of line Ex9I125 are produced in modular design with one module unit width per pole. Can be connected via standard busbars of both fork as well as pin type of connection.
Paremeter | Value |
---|---|
Number of normally open contacts | 4 |
Number of change-over contacts | 0 |
Nominal rated current | 125 |
Rated switching capacity | 2.5 |
Short-circuit breaking capacity (Icw) | 1.50 |
Voltage type | AC |
Width in number of modular spacings | 4 |
Number of normally closed contacts | 0 |
With signal lamp | NO |
Degree of protection (IP) | IP20 |
Nominal rated voltage | 400 |
Colour calotte | Grey |
Built-in depth | 80 |
Number of poles | 4 |
Switching function | Off switch |
Forced segregation (according to DIN VDE 0113) | YES |
Document Type | Document Name | Size | Format |
---|---|---|---|
Mounting instruction Ex9I125 | 1.3mb | ||
Declarations of Conformity Ex9I125 | 0.5mb | ||
Datasheet Ex9I125 | 0.8mb | ||
Catalogue Installation Devices | 0.0gb | PDF WEB |